ASI input module two channel
February 4, 2020
IP Input Module
$100.00
The module is designed to receive DVB-transport stream transmitted in Ethernet networks according to the DVB- over-IP standard using UDP / RTP protocols and further transfer using the Synchronous parallel interface (according to EN 50083-9) to other devices. For VBR (SMPTE 2022-3), only SPTS reception is possible. For CBR (SMPTE 2022-2) – SPTS and MPTS. The module can be used to build various digital broadcasting equipment to enable it to receive transport streams over an Ethernet network, and also to create various gateways (IP-to-ASI, etc.). The transport
stream from the module can be transmitted to the DVB-S / -S2 / -C / -T – / -T2 modulators, DVB TS-to-ASI converters and others.
Control, monitoring and adjustment of the module parameters is carried out using a PC via the Ethernet interface using a specialized program. The module’s internal software is updated via Ethernet. To build multi-channel devices, it is possible to connect via RS232 to the control module, while still retaining the ability to use all the functions of the IP receiver, including updating the internal software. This mode (“Slave”) is activated by means of a jumper intended for this purpose. All the settings of the IP receiver in the “Slave” mode are made through the control module.
There is a modification module with an additional port RS232, designed to control another paired device (for example, a modulator). In the “Master” mode via the Ethernet port of the IP receiver, you can access the settings of this paired module. Presence of “Master” / “Slave” control modes substantially increases flexibility when creating equipment from modules in various combinations.
Related products
-
ASI-output module
$100.00
